justy4me
Never mind all my friend Search Button help me
Posts: 3
|
Post by justy4me on May 4, 2020 20:08:12 GMT -5
Well, I need some advice, after searching and searching I decided to go ahead and swap it out. Unfortunately after pull the old and putting in the new the bell housing and engine block doesn’t line up. Now, i have a 1990 GL and the trans was from a 1990 gl. If anybody can chime in with any advice or solution. Thanks in advance.
|
|
|
Post by jasin on May 5, 2020 1:20:34 GMT -5
there is a difference in bolt pattern in 1.2 and 1.0 you cant do anything about it sorry
|
|