|
Post by Armageddous on Jul 1, 2016 20:25:25 GMT -5
Could somebody please measure some things for me;
Ring gear outer diam Ring gear inner diam Ring gear depth Pressure plate outer diam Pressure plate bolt pattern diameter Clutch disc outer diam Pilot bearing inner diam Pilot bearing outer diam
I, apparently, don't have any of this stuff lying around any more.
Thanks!
Terry
|
|
|
Post by gearheadeh on Jul 2, 2016 21:36:00 GMT -5
Could somebody please measure some things for me; Ring gear outer diam Ring gear inner diam Ring gear depth Pressure plate outer diam Pressure plate bolt pattern diameter Clutch disc outer diam Pilot bearing inner diam Pilot bearing outer diam I, apparently, don't have any of this stuff lying around any more. Thanks! Terry Okay Terry, R.G. Outer D = 248mm R.G. Inner D = 222mm R.G. depth = 14mm Outside step for outer diameter of P.Plate on Flywheel = 188mm Inside step for inner diameter of P.Plate on flywheel = 124mm P.Plate mounting bolt dia. = 210mm Pilot bearing inner D. = about 11mm Pilot bearing outer D. = 25mm I did not use an actual clutch disc or P.Plate, only the flywheel to get all of these..... What engine are you thinking will fit?
|
|
|
Post by Armageddous on Jul 2, 2016 23:26:59 GMT -5
... Thanks gearheadeh Terry
|
|