|
Post by peakyblinders on Mar 2, 2016 1:01:47 GMT -5
Back story bought this from a lady it had a blown head gasket due to over heating.i fixed the head gasket that all fine. It is a 1988 FWD CARB Justy having radiator fan issues. They are no turning on. Coolant is full, cooling system is properly "burped" with a spill free funnel. The heater is turned on full blast and The termistat opens but the fans never come on. I've read about a thermosensor and a thermo switch that are suppose to be on the intake manifold it I only have ONE. I then found this other sensor at the bottom of the lower radiator hose it was clamped on the hard line were the rubber hose clamps too. Can some one tell me what sensor this is. And where is can get one. The wires seperated from the sensor.
|
|
|
Post by Armageddous on Mar 2, 2016 1:06:31 GMT -5
Can you snap some pics of the sensors in question?
Terry
|
|
|
Post by peakyblinders on Mar 2, 2016 1:17:56 GMT -5
OMG is this Terry the one iv heard great things about. Your the person with the knowledge iv read so many threads with your post. I have a few photos of it. But the website says the image it to large to upload. Not sure what I would have to do? Sorry I'm alittle dumb with this stuff
|
|
|
Post by peakyblinders on Mar 2, 2016 1:35:53 GMT -5
Can you snap some pics of the sensors in question? Terry Attachments:
|
|
|
Post by peakyblinders on Mar 2, 2016 1:39:51 GMT -5
Can you snap some pics of the sensors in question? Terry This is the lower coolant hose it was the sensor was clamped with a bracket to the hard coolant line that the rubber radiator hose connects to Attachments:
|
|
|
Post by Armageddous on Mar 2, 2016 10:38:19 GMT -5
OMG is this Terry the one iv heard great things about. Your the person with the knowledge iv read so many threads with your post. I have a few photos of it. But the website says the image it to large to upload. Not sure what I would have to do? Sorry I'm alittle dumb with this stuff I'm the only Terry I know of on this forum, so I'm probably the same person. You can host the images on another website like Photobucket.com or Facebook and link to them from the forum. As far as that sensor goes it looks like somebody put in an aftermarket switch.. can you take a pic of the intake manifold where the original one should be, and follow the wires coming from the rad fan to determine where they go. Terry
|
|
|
Post by Armageddous on Mar 2, 2016 10:39:51 GMT -5
Also it looks like the wires have broken off the back of that thing which have probably rendered it useless.
Terry
|
|
|
Post by earthbounding on Jul 14, 2016 8:41:49 GMT -5
My gen one has this sensor
|
|
|
Post by earthbounding on Jul 14, 2016 9:13:48 GMT -5
It mounts on the coolant line coming off of the water pump. I think its part of the a/c system.
|
|