|
Post by deegore on Dec 25, 2015 19:06:28 GMT -5
The nipple was broken off the solenoid when I got the car, and there were no hoses connected. I fixed the solenoid with some J.B.weld, but am not sure where the hoses should go. I thought it should go to this barb that was capped on the back side of the carb, but there is no vacuum here. Should there be? I I also need to know where the second barb on the dashpot hooks up. Thanks and merry Xmas
|
|
|
Post by deegore on Dec 26, 2015 20:48:33 GMT -5
I found these pics that Chickenofthewoods posted a few years ago. They helped me a lot. It looks like I should just cap one of the barbs on the dashpot. So my big question now is, should there be vacuum at the barb on the back side of the carb? Edit: after some intense Googling I learned the difference between manifold vacuum and ported vacuum. There is manifold vacuum on the passenger side of the carb. I believe I got it hooked up right but found some other problems. Starting a new thread.
|
|