pajarraco
need new engine this one knocks loud
Posts: 17
|
Post by pajarraco on Apr 1, 2015 5:35:34 GMT -5
saw some on ebay look very similar, any body know if they will work? I have a 1993 subaru justy 4wd MT thanks
|
|
|
Post by JustyRally on Apr 2, 2015 3:18:05 GMT -5
Why not just buy a Justy one?
|
|
pajarraco
need new engine this one knocks loud
Posts: 17
|
Post by pajarraco on Apr 2, 2015 20:05:17 GMT -5
ok I'll bite, from where?
|
|
pajarraco
need new engine this one knocks loud
Posts: 17
|
Post by pajarraco on Apr 4, 2015 21:15:19 GMT -5
anybody?
|
|
|
Post by Mato393 on Apr 5, 2015 5:37:35 GMT -5
Rockauto got some.
|
|
pajarraco
need new engine this one knocks loud
Posts: 17
|
Post by pajarraco on Apr 5, 2015 7:39:16 GMT -5
aftermarket strut bars not to be confused with sway bars?
|
|
|
Post by madmatt on Apr 9, 2015 23:58:04 GMT -5
Build your own...not that hard. It's a bar. The issue is clearing the hood. But... before that, if you can weld, seam weld the towers, that makes a huge improvement. then built a bar and tie into the firewall. works. Halfway down this page you can see mine. On the firewall is a welded a thick metal plate, tapped for the bolts to hold it in place. subarujusty.proboards.com/thread/2915/orange-rally-justy-returns?page=2
|
|
|
Post by southerner on Jul 8, 2015 19:18:26 GMT -5
Mad one, my english fails me, could you clarify this bit ? maybe with an image ? what do you mean by that ?
|
|
|
Post by bizarro on Jul 8, 2015 19:25:09 GMT -5
|
|
|
Post by southerner on Jul 9, 2015 20:53:19 GMT -5
I see.. is clear now.. i've seen a video of a japanese engineer doing that to the whole body of a Honda Fit for a racing category in england, i think.. i'll try to find it..
|
|