|
Post by Dominik on Feb 2, 2015 10:45:32 GMT -5
Recently my brake line broke so I had to change it. I changed the part where it was broken. Bleeded all 4 brakes multiples times and the brakes are working perfectly. But the e-brake light is always on even when the e-brake is not engage. I check the brake fluid level but it' snot missing any.
What could it be?
I have a 1995 1.2l 5 doors 4wd Justy(the 1994 Canadian Version)
|
|
|
Post by Mato393 on Feb 2, 2015 10:50:24 GMT -5
I have same problem few months ago... Try disconnect and connect brake fluid level sensor few times. That helps my car with that problem.
|
|
|
Post by Dominik on Feb 2, 2015 12:50:53 GMT -5
Thanks, I'll try that and get back to you.
Now where is the sensor?
|
|
|
Post by Mato393 on Feb 2, 2015 13:51:28 GMT -5
It is the only 2 wires coming out of master cylinder.
|
|
|
Post by Dominik on Feb 2, 2015 13:55:56 GMT -5
thanks
|
|