|
Post by jshrews1 on Mar 24, 2014 11:53:05 GMT -5
The front hub on my 1988 Justy FWD is stripped and, like most of the Justy owners who have faced a similar situation, am having a hard time finding a part. I found a junkyard with an '87 front hub available, but will it fit on my '88? Not sure if the 87 is FWD or 4WD.
Simple answer is "YUP" All 88 and older FWD and 4WD are the same.
|
|
|
Post by indkid87 on Mar 24, 2014 12:53:02 GMT -5
The '87 hub should work just fine. The hubs didn't change until '89 when the second gen justy came out. If you can't find a good one Dusty's justys sells new ones, but they'll cost you a pretty penny. www.dustysjustys.com/home.htm
|
|
|
Post by jshrews1 on Mar 24, 2014 17:03:04 GMT -5
Thanks for the reply! I emailed Dusty's Justy and now I'm waiting on a reply back. One junkyard I called had a hub for $35 but they said that the "bearing" was bad. Do you think they mean the wheel ball bearing or something else?
|
|
|
Post by indkid87 on Mar 24, 2014 20:08:34 GMT -5
There's no bearing in the hub. The wheel bearings are pressed into the knuckle. So maybe they're talking about the wrong part.
|
|