|
Post by ivonko on Nov 5, 2012 23:40:47 GMT -5
that looks awesome, im definantly going to see what it would take to go that route
|
|
|
Post by Vågen on Nov 2, 2014 9:15:46 GMT -5
K, here's the rear at full droop. That's a "roundy round" spring, sorry, slang for circle track... AFCO springs. Cheap and various length and rates. That happens to be a 10" sping, I think the rate is 185 or 225.... high because of the motion ratio between the axle and the spring perch. The adjustable perch is a cheap "coil over kit" which is nothing more then a threaded sleeve, perch and tool to spin the perch... The threaded sleeve is slid over a piece of thick walled pipe, welded to a plate that bolts in at the top. I had to cut the stock spring perch out. Here's the front. Same threaded sleeve, and perch. sitting on the stock perch. 12" 185lb springs up front. Matt I love this. Any idea what it cost?
|
|
|
Post by madmatt on Nov 2, 2014 11:51:20 GMT -5
yeah, like $50 for the sleeves (ebay, shop whatever) and $30 per spring.
|
|