|
Post by mikelx5 on Sept 9, 2011 1:35:21 GMT -5
im looking into adding the rear suspension from a 2nd gen into my 1st but the 2nd gen i have is a 2wd while my 1st is a 4wd are they interchangable? i want to add a rear sway.
|
|
|
Post by madmatt on Sept 9, 2011 9:58:40 GMT -5
The control arms, springs etc are all swappable no problem. Obviously you would need to swap over your hub assembly etc to the two wheel drive parts.
Why not just take the sway bar and weld on the mounts to your existing control arms.
|
|
|
Post by madmatt on Sept 9, 2011 10:01:17 GMT -5
Oh, and it's possible the spring rates vary from 2wd to 4wd.
|
|
|
Post by hollandjusty on Sept 9, 2011 14:00:55 GMT -5
Or swap the control arms
|
|
|
Post by mikelx5 on Sept 16, 2011 1:27:52 GMT -5
my rear rear control arms are actually damaged and dont have a place to mount the sway bars and im gonna switch springs too
|
|