|
Post by s78wingrider on May 12, 2008 15:51:19 GMT -5
Front u joint in driveshaft got so bad I had to pull shaft out and see what I could do. cut u joint out of yoke with 4 inch grinder with thin blade, secured yoke back in with piece of metal strap and small bolt. took back half of shaft out to. now I can't even find part number for u joints runs alot smoother now anyway. Aaron
|
|
89
got Mud? Ice? Snow?
Posts: 398
|
Post by 89 on May 12, 2008 16:28:43 GMT -5
Hi Aaron, Welcome, man, welcome! I had similar ca-ca going on for awhile. Let me point you to the following thread to kind of help consolidate these boards and see if you really are into 'replacing' the universal joints... subarujusty.proboards20.com/index.cgi?action=display&board=trouble&thread=1751&page=1Here's a deal for ya - if you delete your double and triple posts , I'll try to dig up the part #... Seriously, though, this board has helped me out heaps, but is difficult to search sometimes, especially if multiple or vague thread titles pop up. Hopefully we can at least combine U joint data and get you back up and running with some sort of permanent fix! Best Luck (and Skill),
|
|
|
Post by s78wingrider on May 12, 2008 21:24:43 GMT -5
sorry about all the post, but know theres a part number somewhere. I have a good friend that is a retired heavy equipment mechanic, I don,t think theres anything he can't fix or replace. I've learned alot from him and he's done things for me other people said couldn't be done! I will delete posts! Thanks! Aaron
|
|
|
Post by s78wingrider on May 12, 2008 21:29:38 GMT -5
How to delete
|
|