durbas
Justy 1.0 4WD SL - 1985
Posts: 70
|
Post by durbas on Jan 23, 2008 7:07:16 GMT -5
Subaru Justy 1.0 SL 4WD from 1985. Engine Pics: Carburator (can you tell me wich one is the air and fuel regulator?): I have this weels. The left is 14" and the right is 15" wich one is best? Tell me your opinions. More and best pictures coming soon (when arrives my clutch kit!).
|
|
SeattleJusty
No, a boxer will not fit in a Justy.
Posts: 1,587
|
Post by SeattleJusty on Jan 23, 2008 11:34:41 GMT -5
Durbas, are you absolutely certain that the wheel on the right is only a 15" ? I know the wheel on the left is a 14" because I recognize it as a classic BMW 3-series "bottlecap". But look at the size difference between those two wheels. Clearly more than a 1" difference. Check the numbering on the tire. If it reads something like 205/55R16 or 215/50R17 etc. then you know it is a bigger wheel than 15"
|
|
89
got Mud? Ice? Snow?
Posts: 398
|
Post by 89 on Jan 23, 2008 11:53:58 GMT -5
Durbas, Good luck and skill on your project . While the first wheel has always been one of my favorite 14s, be alert to the difference of the 14" E30 'Bottlecaps' 'center bore'. I am under the impression they have a smaller diameter than the JUSTY. Also reference new lug nuts to match the original BMW application bevel-wise to ensure correct seating. Aside from that, what car is that wacky 15" (or 16"?... does look big...) from!?! Interesting one. My 2 cents is to go with the lightest option in order to reduce 'unsprung weight' (see en.wikipedia.org/wiki/Unsprung_weight) for slight handling improvement, to begin with. Go 3,
|
|
durbas
Justy 1.0 4WD SL - 1985
Posts: 70
|
Post by durbas on Jan 23, 2008 12:06:22 GMT -5
i'm sure the right weel is 15" it says in the tire and in the wheel.
And the carburator question. Do you know something?
|
|
|
Post by Izimo on Jan 23, 2008 16:30:29 GMT -5
You mean which screw is to adjust? the one on the right the one on the left is for idling
|
|
durbas
Justy 1.0 4WD SL - 1985
Posts: 70
|
Post by durbas on Jan 24, 2008 4:49:19 GMT -5
Thanks izmo. Sorry for my bad english
|
|
durbas
Justy 1.0 4WD SL - 1985
Posts: 70
|
Post by durbas on Jan 28, 2008 6:20:14 GMT -5
My clutch has arrived!! ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D So i will start to put things together. I hope! I will putt some pictures also. with better quality Be aware, because i might need many of your help!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 29, 2008 7:53:06 GMT -5
Good luck
|
|
durbas
Justy 1.0 4WD SL - 1985
Posts: 70
|
Post by durbas on Feb 1, 2008 12:41:22 GMT -5
|
|
|
Post by hollandjusty on Feb 1, 2008 18:28:14 GMT -5
nice project, keep up the good work
|
|
|
Post by Izimo on Feb 1, 2008 19:11:58 GMT -5
I also want a 4WD Justy
|
|
durbas
Justy 1.0 4WD SL - 1985
Posts: 70
|
Post by durbas on Feb 7, 2008 12:45:09 GMT -5
Heeeelllllllppppppp!!! I get no spark from the coil. What can be the problem? Thanks
|
|
durbas
Justy 1.0 4WD SL - 1985
Posts: 70
|
Post by durbas on Feb 7, 2008 13:01:05 GMT -5
Only get power till here! I'm really f**** up!
|
|
durbas
Justy 1.0 4WD SL - 1985
Posts: 70
|
Post by durbas on Feb 11, 2008 11:13:57 GMT -5
IT'S RUNNING! ;D I explain with pictures later, because my english isn't very good. Now it´s time for adjustments and continuing the painting. STACKS, thanks for the help! I think the problem was something like you said, but as my english sucks, i didn't understand. With pictures maybe.
So lets go! ;D ;D ;D
|
|
durbas
Justy 1.0 4WD SL - 1985
Posts: 70
|
Post by durbas on Feb 14, 2008 12:27:09 GMT -5
I have a problem, not much of a problem, but... The cable that counts the speed and Kms (miles) isn't conected correctly, so i don't know the speed i'm going. Some one can explain me, step by step, how to put it correctly.
Thanks.
|
|
durbas
Justy 1.0 4WD SL - 1985
Posts: 70
|
Post by durbas on Feb 14, 2008 13:08:30 GMT -5
Now the car is on it's weels! ;D And running fine! ;D Here (pointed in the image by an arrow and with that red tape) was the problem. I had to join the wire from the ignition coil with that wire from the little cilinder on the ignition coil with a wire that is yellow with a green stripe (think is the high tention wire): Here is the little problem with the cable that measures the speed and Km. The cable is inside that black protection but isn't correctly connected inside the panel. As I said, need a step by step to do this. Thanks. Hope you like the pics. The project is going, but a little slow (I don't have many time).
|
|
durbas
Justy 1.0 4WD SL - 1985
Posts: 70
|
Post by durbas on Feb 29, 2008 12:25:55 GMT -5
How about the paint job? Tell me what do you think.
|
|
|
Post by hollandjusty on Feb 29, 2008 16:37:25 GMT -5
looks real nice i've been thinking about his paintjob on my own justy (when im 18, 10more months left ) you need a new taillight? or do you have one? too bad you live in portugal otherwise you could come and pick one up here keep up the good work! (and sorry for my bad english )
|
|
durbas
Justy 1.0 4WD SL - 1985
Posts: 70
|
Post by durbas on Feb 29, 2008 17:14:47 GMT -5
Yes i have one. If you look carefully throw the back window you can see it inside. I'd love to go to Holland (To go to the Redlight street! Lol). I will go there for sure during my life.
|
|
|
Post by henri on Feb 29, 2008 17:30:33 GMT -5
looks nice, how did you paint it?
|
|