|
Post by ThreeEyedBandit on Sept 16, 2004 13:41:20 GMT -5
I am curious if anybody knows the flow rate of a stock justy fuel injector? I am in the process of doing a MS swap and this is the only part that is holding me up.
Matt
|
|
SubieGuy
The guy who put a boxer in a Justy. :)
Posts: 191
|
Post by SubieGuy on Nov 11, 2004 10:56:06 GMT -5
I am also megasquirting my Justy. I'll use honda civic 1.6 injectors. They should be fine for my setup. You don't need to have the exact injectors, just keep the mixture ideal at all rpms, and MS will sort out the flow.
|
|
|
Post by ThreeEyedBandit on Nov 18, 2004 21:07:28 GMT -5
Well I found out that they are 19lb/hr injectors, but I am to using different injectors they are off of a Eagle Summit. Do you happen to have temperature pairs for the stock MAT and CLT sensors? I just havent got around to measureing them.
Matt
|
|
SubieGuy
The guy who put a boxer in a Justy. :)
Posts: 191
|
Post by SubieGuy on Nov 22, 2004 6:49:41 GMT -5
My car is a carbureted 1.0 4wd. As you can guess, I have to install a lot of sensors and it takes me a lot more to slap in a MS. As we do not have injected Justy;s here, motor swap is not an option, and I have to build a fuel rail and intake manifold. I have a BMW fuel rail that I will modify for my Justy.
|
|