|
Post by Esteban on Oct 27, 2004 7:22:51 GMT -5
I found a set of Chevette wheels & put those on a Justy to go to 13" tires. You do have to cut off those 4 barbs on the front hubs, though. Fit nicely & when painted, look good. Now a Justy can have " Vette" wheels!! LOL
|
|
|
Post by RustyJusty on Dec 17, 2004 13:42:08 GMT -5
thanks for the tip....
since the chevette is RWD, does its wheels stick out more on the justy?
|
|
|
Post by Esteban on Dec 17, 2004 17:18:50 GMT -5
They look fine & fit good. I do run small 13" tires on them.
|
|
|
Post by Matt on Dec 17, 2004 18:19:19 GMT -5
Maybe it's just me... but I have some real concerns about grinding off those tabs... I preffer to take the new (aka used Honda/chevy/whatever) wheel and grind it to fit... therefore you retain those tabs, which are there for some reason by some engineer... and you can still fit real Justy rims without undue pressure on the lugs....
Just my two P
|
|