|
Post by Torino on Sept 15, 2004 23:32:58 GMT -5
i need some cheap 13" wheels for my 87 justy. what will fit.
|
|
|
Post by justyfanatic2 on Sept 16, 2004 7:27:09 GMT -5
Ok let's see now...the Justy has a 4 X 100 lug pattern so any rim that will fit the Nissan Sunny/Sentra, Toyota Corolla, Mitsubishi Lancer ( I think the VW Golf but I'm not sure) to name a few. All these cars have alloy wheels as standard on one of their models or another. A scrap yard should have loads of them. If you want new rims, the european and asian markets still supply 13" mags but I doubt you will find anything new in North America or Canada. I had tri-spoke PCW/Panthers on mine.
I think some others are listed in a previous post in this section so you can read those as well. On some of the wheels you may have to grind the inner hole to accomodate the hub flange but I didn't need to.
|
|
|
Post by torino on Sept 17, 2004 0:29:17 GMT -5
Did the Justy ever go to 13" wheels and if so will they fit an '87.
|
|
|
Post by justyfanatic2 on Sept 17, 2004 7:55:40 GMT -5
Yes they did. Some of the 1.2's came standard with 13". The 1.0's that were sold here had the option of the wheel upgrade to 13" alloys. I can only recall one type of alloy wheels for them though. They should fit the 87. A simple check is to measure from the middle of one lug stud across the centre hole to the centre of the opposite lug stud with a tape measure or a ruler. If that measurement is 100 millimetres you are good to go. Check the link below to see how it's done. www.streetdreams.org/tech.php
|
|