|
Post by dunnyduck on Jan 27, 2005 0:02:09 GMT -5
hey, im putting a 1987 justy glx, engine (1200cc) in a offroad go kart, dont know which plug is 1, 2 and 3, to connect plug leads to,does it go from 1 to 3 from left to right or opposite
|
|
|
Post by Llama on Jan 27, 2005 17:16:22 GMT -5
|
|
|
Post by dunnyduck on Jan 28, 2005 3:36:13 GMT -5
na front wheel drive engine mounted backwards, so the engine is in the rear and is rear wheel drive, kart will weigh no more than 200kgs (not including engine) so should go really well, will send a link of sum pics wen done, still cant figure out ignition coil etc
|
|
|
Post by justyfanatic2 on Jan 28, 2005 12:03:41 GMT -5
The firing order is 1-3-2 but the picture looks flipped. Cylinder 1 is nearest the pulley but are on the left side of the car when you stand in front looking into the engine bay. Cylinder 3 is nearest the distributor.
|
|
SubieGuy
The guy who put a boxer in a Justy. :)
Posts: 191
|
Post by SubieGuy on Jan 28, 2005 14:28:13 GMT -5
Looking at the engine, cyl #1 is on the left side. You can see the ebossed numbers just above the spark plug wires. Hope this helps...
|
|