|
Post by Gear problem on Jul 23, 2005 3:10:08 GMT -5
Hi!
MY 1992 1,2I justy`s transmission will not shift from 3 to 2 gear with out a big noise unless you drive below 25km\h.
Do anyone now why?
Best Regards Carl Henrik Unelsrød
|
|
|
Post by SUBIEJIM on Jul 23, 2005 21:44:18 GMT -5
Carl, Sounds like a worn blocking ring on the 2nd gear side of the 1-2 synchronizer assembly...Does it also grind on a quick 1st gear to 2nd gear shift? My Justy does the same thing (It has high mileage). A drain and refill with fresh gear oil may help a bit but, to fix the problem you must R&R (Remove & Replace or Rebuild) the trans. It may also be a shift fork and or rail problem but, I think it unlikely as I have not seen many problems in this area on Justys...Unless it has been really "hammered hard" on upshifts and downshifts. Well, Good luck with your Justy! Jim
|
|
|
Post by baron on Aug 5, 2005 6:42:59 GMT -5
my guess is your gearbox had been towed on, have you got a tow bar hooked up?!
|
|