Tuolumne Kid
Never underestimate the power of the N00B
Posts: 45
|
Post by Tuolumne Kid on May 9, 2018 10:50:43 GMT -5
So I have a 91 4WD Justy Replaced the clutch about 1 year ago Replaced the CV axles about 1 1/2 years ago Replaced the break pads and shoes 2 weeks ago It had some clicking coming from the front left when I go up a hill in lower gears but never really bothered me. But now when I engage the clutch and press on the gas it really starts clicking bad and shaking, If i press in the clutch it runs smooth as ice. If it is in neutral and moving with the clutch out it is smooth. Does that sound like I just got a bad CV Axle. I bought them from Autozone with lifetime warranty. www.autozone.com/drivetrain/cv-axle/duralast-gold-cv-axle/401140_587558_12551_2805I sure hope it is not the clutch that was hard to change out. What do you guys think? Thanks
|
|
|
Post by madmatt on May 10, 2018 14:39:40 GMT -5
Check the drive splines (hubs and axles). Try it in 4wd. If that is better.... very likely worn splines.
|
|