|
Post by aberlin on Mar 10, 2017 15:40:00 GMT -5
Hello,
I'm looking to replace my driver door on a 3door 91GL 4x4. found a door on car-part.com from an 87. Are they the same?
thanks,
|
|
|
Post by aberlin on Mar 10, 2017 16:31:12 GMT -5
this shows them to be the same through all the years, but what about the the ones with seat belt in-door?
|
|
|
Post by madmatt on Mar 14, 2017 13:50:45 GMT -5
I missed this... I don't believe they are the same... Not to say they won't fit! But there is a significant difference (not statistically validated ) in the lines of the 2nd gen fender and the first gen doors... I have 2nd gen fenders on my car, and they don't line up mid door. There is more outward curve to the 2nd gen, compared to the slab side of the 1st.
|
|
|
Post by aberlin on Mar 15, 2017 15:46:06 GMT -5
Do you mean the lines running fore-aft of the car in side view or the out of plane curves top-bottom when viewing from top? here is an overlap of gen1 and gen2 sideviews, showing these two lines to match. imgur.com/a/nnddL
|
|
|
Post by madmatt on Mar 16, 2017 10:02:50 GMT -5
I was thinking the curve... waist line crease things line up perfect. However, I just took some pics, it's more the fit to the A-piller that is the issue then the door, the doors may be more similar then I thought!
|
|