|
Post by bdemoura on Jun 21, 2016 2:59:06 GMT -5
I can't get it to rotate very much at all. I just want to reassemble and this is the last hiccup I ran into. Any help is appreciated, thanks!
|
|
|
Post by dez on Jun 21, 2016 4:29:39 GMT -5
Did you remove the spark plugs, this usually makes it a lot easier to get it aligned.
|
|
|
Post by Armageddous on Jun 21, 2016 15:17:48 GMT -5
Back off the lash adjustors. It's probably hanging up on the rocker arms
Terry
|
|
|
Post by bdemoura on Jun 21, 2016 19:37:24 GMT -5
I took the spark plugs out and had no improvement. The manual mentions loosening the 'valve adjusting screw so the rocker arm has free play' is that what you're talking about? I have the rocker cover off, what does that adjustment screw look like?
|
|
|
Post by Armageddous on Jun 21, 2016 21:17:05 GMT -5
Where the rocker arm meets the valve stem there is a 12mm nut and a small bolt for adjusting the free play
Terry
|
|
|
Post by bdemoura on Jun 22, 2016 20:11:21 GMT -5
Thanks for all the help, I finally got it to rotate. Now that I've got the cam gear timed how do I set the valve adjusters back? What should I use on the square bolt heads? Thanks again!
|
|