|
Post by sp0ngebob on Dec 17, 2014 16:11:01 GMT -5
Can anyone confirm for me the dimensions of the Gen2 4wd 5spd spindle nut sizes?
I THINK the front is an M20x1.50 and the rear an M18 but i need someone to confirm this.
|
|
|
Post by Mato393 on Dec 18, 2014 8:04:21 GMT -5
I have re-cut front on mine, I am not 100% sure but I will bet on M20x1,5 and rear are available on rock auto(M18x1,5)... And on 1987-1988 4WD MT should be all M18x1,5.
|
|
|
Post by sp0ngebob on Dec 18, 2014 11:50:07 GMT -5
yah, i think i confirmed that too....problem is im an 89 4wd.
|
|
|
Post by madmatt on Dec 18, 2014 23:13:35 GMT -5
I looked, honestly I did... can't find any spares here, and the car is off in storage.
I would think that is correct, but it might be 22 x1.5. I can't remember if it's a 30 or a 32mm socket... I know the rears are 27. Something makes me think the fronts are 32, in which case I'd bet its 22mm...
|
|
|
Post by sp0ngebob on Dec 19, 2014 14:29:53 GMT -5
i wound up ordering one from fastenal locally. hopefully it arrives today and i can go get it. i ordered an M20x1.5 and if thats wrong, i dunno what ill do. probably have to take in the known good one on the other side and size that.
|
|