|
Post by guest on Feb 28, 2006 14:51:18 GMT -5
i just got my first justy.
it's a 94 2wd 5spd.
my problem is when it idles or when light pressure is given to the gas peddle,it runs real rough.
they guy i got it off of said he thinks it's the cap/rotor and plugs? could it be that or maybe fuel filter?
i own a 94 legacy gt wagon and seeing that that doesn't have a distributor,i haven't had a problem like this for years and can't remember what else to check.if anyone can give suggestions it'd be appreciated thank you.
btw-i'm new here and waiting for approval(94justy) that explains the guest mode
|
|
|
Post by Esteban on Mar 1, 2006 6:53:06 GMT -5
A good tune-up may be in order. Plugs, wires, cap, rotor, PCV valve, air filter, && a fuel filter. Put some "Seafoam" gas treatment in the tank as well & see how that does.
|
|
|
Post by SavageJusty on Mar 16, 2006 19:39:53 GMT -5
Is it always bad idle cause just yesterday I had my car dx with some problem, every once and a while the engine light would come on and bla bla, and the justy would run like crap, and I discovred that the harness that goes to the distributor is very taught, so when the engine torques it pulls on it a little and smashin around in the justy it wears it out and could severe the wire, and the pro that showed me this explained it was the camshaft position sensor that could be causing it and when we checked the code it says camshaft position sensor... SO, I am going to replace the piece of harness and lengthen the wire, and I will get back to you and let you know if this cures the problem.
|
|