|
Post by bergerdude on Oct 23, 2005 15:27:55 GMT -5
The CEL light comes on and off while driving. It sometimes has starting issues, and always hesitates a bit when I give it gas. Im not sure if they are related but I want to figure out why the light is coming on. Any ideas?
I know theres the o2 sensor and the water temp sensor that the ECU uses, what else could be the problem?
|
|
|
Post by Rally88Justy on Oct 30, 2005 14:52:36 GMT -5
Check the CEL light under the dash that blinks out the code for whats wrong.Up under the left side with the key on (not running).Will blink out long and short blinks.Record those and the dealer will tell you what is the problem.Thats how I did it.
|
|
|
Post by Scoobaru on Nov 1, 2005 17:15:39 GMT -5
Search around for the process/codes on another thread here, I previously posted it for an 88. There is a connector that has be in the proper state (connected?) to flash the codes out.
|
|