|
Post by nemolovich on Jun 15, 2005 23:10:47 GMT -5
My engine was leakin and I have done the valve cover gasket, distrubutor O-ring and oil pan gasket. That pretty much solved my problems. No oil drips on the ground when my car is at rest it never did, but I still found a little oil leak at the front of the engine. I know my cam shaft seal and crank seal are fine, also the oil pump housing seems dry too. Where could it be leaking from? Is it the head gasket? It seems to be coming down right around the water pump, it looks like it's coming from behind the water pump on the crankcase? Their is a gasket behind the water pump on the crankcase housing and it is wet?
Also, to do this work I am sure I will have to remove the crankshaft, what would be the best way to remove the bolt on the crank without an air gun? Any suggestions would be appreciated, thanks.
|
|
|
Post by nemolovich on Jun 20, 2005 22:39:08 GMT -5
It's probably the head gasket because I don't think it can leak oil on the crankcase behind the water pump. It's such a small leak though, is it worth redoing the head gasket for?
|
|