Danimal
Getting my two Justys back together after a Justy hiatus.
Posts: 589
|
Post by Danimal on May 23, 2010 20:11:08 GMT -5
Update time: Back down on 4 wheels You have not jumped the gun as far as being able to get the drivesshafts in have you? I have the impression that you are mechanically minded enough not to fix everything at the hub. It has to be able to move away enough to let the driveshaft slip onto the gearbox. I just can not clearly see quite what you have done there. Is it all Justy Parts beyond the framework? Great work anyway,.. you will soon know if you have a problem when you get on with that bit and I am confident you will soon find a way to put it right. I didnt know that your project was of such monumental importance.... very lucky indeed to have Dr. Who working ont MegaSquirt!: Danimal
|
|
|
Post by dazzler on May 24, 2010 15:29:41 GMT -5
lol @ Dr Who i will post this link to his FB lol Right to explain a little So far the only items Justy is the engine, everything on the frame & hubs is Rover Metro (Rover 114 en.wikipedia.org/wiki/Rover_Metro)Drive shafts are not fixed yet, they are not even made, the part shown is Half of a justy one I havent made engine mounts yet, its just placed there
|
|
Danimal
Getting my two Justys back together after a Justy hiatus.
Posts: 589
|
Post by Danimal on May 25, 2010 17:53:55 GMT -5
Oh, right, I remember seeing that diagram now... I knew those parts were not familiar. Have you still not sourced the grey bits yet then? Danimal
|
|
|
Post by dazzler on May 26, 2010 3:22:23 GMT -5
well, i have a good idea what i am going to use, but i am going to buy them in when i come to the back of the car, progress will now slow for a couple of months as i have to do the mrs car, then i will be back on this
|
|
Danimal
Getting my two Justys back together after a Justy hiatus.
Posts: 589
|
Post by Danimal on May 29, 2010 19:26:08 GMT -5
I do hope that you mean your wife's car and not putting the Justy on hold to work on a toyota MRS! Damimal
|
|