|
Post by wilk1730 on Jun 16, 2004 7:23:09 GMT -5
i just bought this car off a guy for 250 bucks, with 64000 miles on it. The only problem with it is a sqeal when u push in the clutch pedal, I've replaced cluches before the justys seems to be a bit harder with not much room to work.... so far this is what ive done. we removed the support members below, the front axles and knuckles to the struts all the wiring to the tranny including the front half of the drive shaft and the whole exhust system..But it seems the lil bastard wont drop is there more mounts then the three(one in back by fire wall, pulley side and driver side) is there a easier way to put in the a new clutch?
|
|
|
Post by Justyracer on Jun 16, 2004 7:31:36 GMT -5
is there a easier way to put in the a new clutch? remooving the engine ;D naa...not really...it seams like your close to it ? if you have remoove all the bolts around it...the starter and all... i think the way we did it was to also remoove the BIG crossmember that go from driver to passenger side. Im not shure if you have to remoove it ? but thats how we did it just to have lots of room and to have everything out of our way. Usualy we change cluch wen we do engine work.
|
|
|
Post by justyfanatic on Jun 16, 2004 12:26:44 GMT -5
There is also a bottom mount on the underside of the tranny/engine. If you pull the cross member and drop it from underneath you shouldn't need to pull the mount.
|
|
chewey
i travel over 1200 clicks every year but never get to leave on my own country
Posts: 20
|
Post by chewey on Jun 23, 2004 21:27:00 GMT -5
Just finished replacing the damn clutch in my justy...we dropped the engine right through the bottom then my friend just picked up the front end and i slid the engine out lol...thats what happnes you you have nothing to work with though....
We figured we could just leave the engine in but we didnt have enough room and we needed to drop the whole thing...
btw i hope you dont have to wait 5 weeks for a clutch kit like i did....
should have some pics of the torn out engine soon...wish i would have taken a pick of the tractor putting the engine back in the car...what a sight....
|
|