|
Post by spiked3cylinder on Nov 4, 2009 13:30:55 GMT -5
Greetings everyone,
I haven't looked into this too much, just a quick peek under the rear axles....it appears there isn't much room to work with by the rear differential, it's tucked up pretty tight.
Is there easy access to the uppper plug, to add fluid once I've drained the old? What type of gear lube shall I place into the little box?
Any tips or comments greatly appreciated!
|
|
|
Post by RedRooJusty on Nov 5, 2009 21:42:10 GMT -5
|
|
|
Post by streetruler on Nov 6, 2009 0:12:53 GMT -5
the paint is from the factory. it should be across the fill bolt to the housing. lets you know if it was turned.
|
|