|
Post by tougelegacy on Dec 2, 2007 23:11:39 GMT -5
Does anyone have a problem with rear camber? My had clearly been hit pretty hard from the rear im not sure if thats the cause of it or not, but i have some serious camber issues out back. Way too much positive camber. If anyone had experienced the same problem is there a fix. If anyone has detailed pics of the rear suspension i would like to study them and get something custom made up to fix it.
|
|
|
Post by formulaphoto on Dec 6, 2007 20:56:06 GMT -5
How much positive camber does yours have? The Justy's have a fair bit of "odd" camber, especially when the suspension is extended.
|
|
|
Post by tougelegacy on Dec 7, 2007 17:31:03 GMT -5
not sure exactly how much havent had a chance to get it on the rack, but i can visually see its much more than id like. I want neg camber. The front has negative camber in it now since ive lowered it.
|
|
|
Post by longbeachjusty on Jun 9, 2009 14:44:33 GMT -5
anyone have new advice on fixing the rear camber?
|
|
|
Post by lowryde on Jun 9, 2009 20:06:37 GMT -5
you may be able to take the rear strut out and cut the 2 bolt holes longer to wards the center of the car. I'm not sure how much wiggle room there is were were the rubber bushing comes through the body but you could possibly gain a few points there. maybe if you loosen the bolts were it attaches to the knuckle there might be some to be found there
|
|