|
Post by ultima on Mar 14, 2009 19:11:53 GMT -5
Found a gen2 Trendy (Justy) and bought it today. It's got a stuck clutch and misses the axel between gearbox and rear. Don't really know what I'm gonna do with it. I already have my 87' trendy which I love and the engine is vibrating like hell and running very bad and then the exhaust sounds too much. However the "new" trendy is very good at these parts. I'm thinking about pulling engine and drivetrain to use for my gen1 and eventually use the chassi for some future project. I have really wanted to build a justy with another engine and RWD I would really like to keep them and play with, but since my parents now has 10cars standing around I feel kinda bad to take up space. Maybe it will end at the scrapyard, but I hope not Well some pics:
|
|
|
Post by ultima on Mar 15, 2009 4:52:39 GMT -5
Yeah I'm gonna try to keep it, but my mother isn't too happy about all the cars, but well my father has 6 cars so 2 of mine can't be to bad I'm planning on swapping the carb and engine mounts from the red to make the other run better, and then I could go ahead and install my turbo on the newer to see if I can get it to work
|
|
|
Post by ultima on Mar 15, 2009 12:24:55 GMT -5
How do you remove the plastic frame around the stereo, clock, cigarette lighter etc?? It was much nicer on this car, and it also had a VFD-clock instead of my gen1's boring backlight version And also, does the cv joints/drive axles fit between these models?
|
|
|
Post by kernal on Mar 16, 2009 10:59:43 GMT -5
Above the ashtray (up from the bottom) and remove the control knobs and faceplate from the temp control. You should keep the red car running and rent it to us Yanks when we come to visit
|
|
|
Post by ultima on Mar 16, 2009 18:01:11 GMT -5
Ok, I will try that. I knew about the bottom screws, but nothing more. I think I'm gonna get the clutch loose and get a driveshaft so that it can drive Oh yeah, how about the drive axle, will those from this car fit on my 87' gen1?
|
|
|
Post by kernal on Mar 16, 2009 18:42:58 GMT -5
Went to NAPA online store and checked axle part #s they are different for Gen1 and Gen 2. But remans are only around 65.$
|
|
|
Post by ultima on Mar 17, 2009 5:31:16 GMT -5
Where did you find those (URL?)? It seems they are not too hard too find in "over there" in USA, but here in Sweden you can only get over priced, old used ones
|
|