|
Post by lowryde on May 5, 2008 22:15:54 GMT -5
check it out put a msd sci box on my 88 efi makes a huge difference smooths out the idle better throttle response and seems to pull harder off the line. costs approx $250 parts msd sci 6300 (MSD-6300) msd tach adapter (PN 8910 EIS) or the fuel injection will not work msd blaster SS coil (MSD-8207) it also recommends replacing cap/rotor upon installation
|
|
Dunk
EF12 Turbo 12psi
Posts: 576
|
Post by Dunk on May 6, 2008 8:24:49 GMT -5
When i asked MSD if there Ignition Retard Module worked on the 3cyl cars they said no Shame really, would have been really handy!
|
|
|
Post by purplehaze on Oct 2, 2009 9:54:04 GMT -5
what all do i need to put one of these on a 1990 fi justy?? will the revlimiters and stuff work?
|
|
|
Post by lowryde on Oct 2, 2009 19:02:19 GMT -5
the box dose not have a rev limier feature no one makes one for 3cyl u have to set it on 6 and double the rpm so 3000=6000 the parts list is above thats all you need dont forget the tach adapter or your hooped it will NOT work. and the box helps out 100% smoother idel better responce
|
|
|
Post by purplehaze on Oct 3, 2009 11:51:44 GMT -5
so i put in a 3k msd chip and it sets it at 6k? that makes sense... how do i hook it up with the distributer?
|
|
|
Post by lowryde on Oct 3, 2009 21:25:53 GMT -5
it ties into the coil control + - from the pcm with the tach adapter then it uses the megnetick purple and green to control the box then to the coil the tach wire on the box is not used in the msd tach adapter instructons it will say the exact wireing its really easy if i remember i think is 3 wires and a meg conecter to the box
|
|
tbagg
little AK monster
Posts: 200
|
Post by tbagg on Oct 3, 2009 21:44:34 GMT -5
too cool! Thats going on my list! Good work man! -T
|
|
|
Post by purplehaze on Oct 4, 2009 22:37:19 GMT -5
awesome can u post some pics of instal??
|
|