|
Post by justyjon on Mar 22, 2008 16:06:53 GMT -5
Found some sweet 13" rims that look like they should fit. 13"x5.5" with a 4x100 mm bolt pattern. +35 offset (which is the max offset that would fit?) Only spec I can't find anywhere is the centre bore. Ah well, they are nice looking and cheap enough to make the extra cost of having them machined, if necessary. BTW, over here in Canada, it is a bit tricky to find any 13" wheel/tire combos that will fit. These beauties are available at most tire shops. I am about to order a set, I will post the results of my experience! www.sfxperformance.com/parts/ARA95-35510.htm
|
|
|
Post by gearheadeh on Mar 22, 2008 17:23:43 GMT -5
Beware of too much offset as they will rub on the rear trailing arms and the inner fender at the front!.
|
|
|
Post by justyjon on Mar 22, 2008 17:45:00 GMT -5
Yeah, I'm a bit worried about that myself. My local tire shop measured and remeasured. They think they'll work. I'll be running 165/65R13 tires on'em.
To quote Seattlejusty, in another thread:
Torino, for a 13X5" or 13X5.5" wheel to fit onto a Justy, it must have the following spec:
Pitch circle diameter (bolt pattern) of 4X100mm
Offset of no more than +35mm (a little less is ok too)
A center bore of approximately 60mm
Anyone sure this will or will not work?
|
|