|
Post by torino on Aug 14, 2007 8:16:53 GMT -5
What 13" wheels will fit '87 Justy?
|
|
SeattleJusty
No, a boxer will not fit in a Justy.
Posts: 1,587
|
Post by SeattleJusty on Aug 14, 2007 8:34:17 GMT -5
Torino, for a 13X5" or 13X5.5" wheel to fit onto a Justy, it must have the following spec: - Pitch circle diameter (bolt pattern) of 4X100mm
- Offset of no more than +35mm (a little less is ok too)
- A center bore of approximately 60mm
The actual size is 59.2mm but you may see it listed as 60mm Most of the wheels you'll find out there will have a 57mm center bore and although it doesn't sound like much difference, I can tell you from junkyard experience that if a wheel with a hole 2mm too small is forced onto a Justy hub, it will probably never come off. Besides the stock Justy GL 13's, the only known stock wheels in the US that you can slap onto a Justy straight away are some older 80's Nissan wheels from the early Sentra/Pulsar/NX I heard rumor that in Europe there are Renault wheels that fit but I cannot confirm this. It is possible to have the hole machined larger so that you can fit other wheels. I had my VW wheels machined to fit my Gen1 Justy for $100
|
|
|
Post by torino on Aug 14, 2007 17:51:47 GMT -5
Thanks
|
|