|
Post by boxhead on Oct 10, 2004 20:23:47 GMT -5
the pin in the drivers side wheel must have fallen out along with the strange large bolt in the rims center causing the shaft spin while not connected to the wheel! can i just replace the bolt and pin or is it a cv joint?the car was movable when i used a nail where the pin went but it broke within 3 ft
|
|
|
Post by RustyJusty on Oct 11, 2004 10:58:22 GMT -5
I assume you mean the large (30mm) axle nut and the cotter pin that holds it in place. Both should be easy and cheap to replace. Check your local auto parts store.
|
|