|
Post by maltajusty on Mar 22, 2004 0:56:45 GMT -5
|
|
|
Post by Justyracer on Mar 22, 2004 11:18:18 GMT -5
Your justy is niiiiiiiice..... was the rear "wing" oem or did you get it aftermarket ? i like the turning signal molded in the bumper...i wonder were i could find them ? i would like to replace them by some fog ligth and replace them somewere else liek on your car...
|
|
|
Post by justyfanatic on Mar 22, 2004 13:46:14 GMT -5
The molded turn signals in the front bumper are from the European spec cars. The one that came to Jamaica also carry the turn signals in the same place (I guess because we drive on the left here so we use some Euro models here. Where you have the turn signals are actually covered by molding in our versions. Most persons eventually take the molded cover out and put fog lights there. Our corner marker lights are usually white as well.
|
|
|
Post by Neuspeed94 on Mar 22, 2004 19:30:31 GMT -5
Hey maltajusty! It's about time you joined this board. ;D I'm evofmcjwr on cardomain(in case you didn't know). Justyracer, the wing is made for a different type of car. Maltajusty modified the wing to fit on his justy.
|
|
|
Post by maltajusty on Mar 23, 2004 0:59:20 GMT -5
Hi all, Thanks for the complements. As I said in an other thread since then I have fitted 15" wheels but I need the suspension to be modified especially at the back since on huge bumps it rubs a bit. I will soon fit custom coilovers. The springs will be justy a bit stiffer but not to much in order not to ruin the ride.
With regards to the rear wing, it was aftermarket but it was for the Subaru and no mods where needed - just fit on. It was from ms-design. They also have an upper wing.
Soon I will fit a front bumper, modify the rear one and sideskirts.
Thanks once again Ray
|
|
|
Post by DoItSidewayz on Mar 23, 2004 2:28:13 GMT -5
you have a part number for the upper wing for the justy??? i can't find it on their website. they don't list subaru at all
|
|
|
Post by Neuspeed94 on Mar 23, 2004 11:13:36 GMT -5
you have a part number for the upper wing for the justy??? i can't find it on their website. they don't list subaru at all Got any pics of it too?
|
|
DBA
I'm going to rallye with a Justy
Posts: 121
|
Post by DBA on Mar 24, 2004 2:36:45 GMT -5
Yeah, I'd be interested in an upper wing too!
|
|
|
Post by maltajusty on Oct 31, 2004 12:08:55 GMT -5
See the latest pics on Cardomain.com
|
|
|
Post by maltajusty on Nov 27, 2004 9:00:51 GMT -5
|
|
|
Post by maltajusty on Jul 4, 2005 22:08:59 GMT -5
Hi all,
As you probably know I am currently working on a bigger carb replacement. This is a down draft Weber twin choke 36 IDF. It's from an Alfa 33. Currently I am working on the harderst part of the project i.e. making the adapter from two chokes that goes into the inlet manifold cause I kept the original inlet manifold. The design on the adapter is important for fuel/air flow. If it comes bad the accelleration will not be smooth.
Keep you informed on the progress.
Ray
|
|
|
Post by baron on Jul 5, 2005 5:04:25 GMT -5
the 1st page, second pic down (angle from the rear) looks the dogs danglies. amen brother!
hows she ride now lowered? did you do the lowering before or after the 15's went on? i want to get new suspension on mine but dont know because of how hard bumps feel on a normal day.
im lost - are those fog lights in the bumper or clear indicators? or are you talking about the normal orange lights? the "moulded" ones came on the later Mk2 justy here, and the ones with the bit poking out on the earlier cars. i think this is because they didnt have a side repeater (between front wheel and wing mirror) on the earlier ones so it was needed for cars looking at the side of the car. then again it could be the difference between a 5 and a 3 door justy...??
im tempted with the lower lights but already decided that some ducting will go in for cooling the engine, and 180mm spots on the front! just got some blue headlights and orange side lights! wehey!
|
|
|
Post by maltajusty on Jul 11, 2005 23:49:30 GMT -5
Hi baron,
I have lowered the car after the 15 inch wheels went in. What I also did to prevent rubbing was to install a set of hard bump stops in the rear shocks. The ride got a bit on the stiffer side but since I don't use it everyday for me it's ok. As for the front lamps they are just spot lights.
Maybe you could help me on this, the MK1 used to have plastic trim on the front and rear fenders, do you jnow where I can buy these?
Regards Ray
|
|
|
Post by freeman on Jul 17, 2007 16:21:25 GMT -5
very nice....what mark neblineros? ?
|
|
coal
Lets roll. When I get rollin.
Posts: 468
|
Post by coal on Jul 22, 2007 1:26:27 GMT -5
Yeah it looks really nice. The spoiler gives it a pretty good look. The interior is sweet also.
|
|
|
Post by dodimir on Nov 26, 2008 14:31:48 GMT -5
|
|
89
got Mud? Ice? Snow?
Posts: 398
|
Post by 89 on Nov 26, 2008 19:22:30 GMT -5
|
|
|
Post by pakkart on Dec 2, 2008 10:37:19 GMT -5
Awesome looking car! Very nice
|
|