|
Post by Jimmer on Mar 7, 2004 15:36:54 GMT -5
You can see my Justy here.
|
|
|
Post by Jimmer on Mar 7, 2004 15:37:38 GMT -5
|
|
|
Post by BrassJusty on Mar 7, 2004 21:40:03 GMT -5
Where did you move your turn signals to? And where did you get the clear corners?
That's one of the nicest ones I have seen yet!
|
|
|
Post by Jimmer on Mar 8, 2004 9:17:23 GMT -5
My turn signals are in the bumper/fender, there is also a repeater in the wing behind the wheel. You can see this in the 5th picture.
This is the stock set up in the uk, and ironically I would like to relocate them to the position you all have them. The light next to the headlight on the uk model is the sidelight.
|
|
|
Post by justyfanatic1 on Mar 8, 2004 11:03:15 GMT -5
The same applies to those that came to Jamaica as well. The clear corner lights are park lights and indicators are in the bumper and behind the front wheel arch. Cool car. I think we get European spec cars here but the engines are smaller.
|
|
|
Post by Neuspeed94 on Mar 8, 2004 14:43:09 GMT -5
If it is not too much trouble, could you get a picture of your justy directly from the side at about 6-7 feet away. I want to see how good those wheels look on your justy, because I am currently debating whether or not to get 14" wheels for my justy. Also, when you put your 14" wheels on, did the car lose any power due to the larger wheels?
|
|
|
Post by Jimmer on Mar 8, 2004 15:40:35 GMT -5
Will try to do the pic for you as soon as possible. It is dark here now, and will also be dark when I get home from work tomorrow, so it will be Weds at the earliest.
I haven't noticed any power loss at all as I tried to keep the rolling radius as close as possible to the original. I have noticed however that with the wider wheel the grip is increased and cornering is now even more stable it also drops in and out of 4wd better than before.
|
|
|
Post by Jimmer on Mar 10, 2004 17:14:16 GMT -5
Neuspeed94, As promised I have taken some more pics of my car direct from the side so you can see the wheels. I have also done a couple more close in of the wheels too. See them here www.cardomain.com/memberpage/544205/2
|
|
|
Post by Neuspeed94 on Mar 10, 2004 21:28:05 GMT -5
Thanks!
They look great! ;D
|
|
|
Post by Jimmer on Mar 17, 2004 6:58:08 GMT -5
|
|
DBA
I'm going to rallye with a Justy
Posts: 121
|
Post by DBA on Mar 17, 2004 9:05:32 GMT -5
Might indicate a broken big end bearing which is pretty common to this engines ...
Greetings, Klaus
|
|
|
Post by Justyracer on Mar 17, 2004 11:33:23 GMT -5
huu...this sucks!!!
but its kind of part of the game....those engine brake...i broke 4 in one year...but some how i got lucky after that and my engine lasted me even after 5 or 6 rally...but its time for a rebuilt just in case...
It dosent sound like a rod bearing....mite be a crank bearing but i never ad that problem...
us it was always the rod bearing....and once it was the water pump that kind of ginded the cover and got stuck in it ? after that noting was mooving....
a otter time it was a piston that went drye ? we still dont know wy ? and just melted and destroyed the cylinder at the same time befor it got jamed....
|
|
|
Post by crjusty89 on Jun 1, 2005 17:57:23 GMT -5
I understand that you put 14 rims did you had to do some special work for them to fit in?
|
|
|
Post by Jimmer on Jun 5, 2005 8:37:10 GMT -5
No they just bolted straight on. Took some time finding some in a size which would fit without any rubbing tho.
|
|