|
Post by dundun on Aug 29, 2021 18:42:08 GMT -5
I took off the supercharger my justy had when i bought it half a year ago and replaced it with a 36/32 weber kit for a subaru brat. However now that i have another car as well i wanted to make it a bit more exciting by putting the supercharger back on. I got myself a replacement carb for the charger, but its being a bitch. So i was wondering if anyone had any ideas for a throttle body i could get as a replacement? The carb for the charger is a zenith stromberg cd2. It will be pushing 0,75 bar or maybe 1 bar at most. Just to get it over 100hp for some winter fun. I can get a adpater plate made to fit the charger so a single or dual would be the only way i can think of making it work. Any help appreciated
|
|
|
Post by jasin on Aug 30, 2021 0:12:30 GMT -5
0,75 or 1 bar it's quite a lot and will gives you much more then 100hp, but you need to lower CR, otherwise your engine will blow.
|
|
|
Post by dundun on Aug 30, 2021 1:09:19 GMT -5
0,75 or 1 bar it's quite a lot and will gives you much more then 100hp, but you need to lower CR, otherwise your engine will blow.
It was produsing around 90hp at 0,5 with the wheel that i had and the next step up is 0,75. As for the lower cr thing im going to need it in with a tea spoon. With the current setup its running very rich, as the carb is meant for a 2l. So should i try with something for 1,6l?
|
|
|
Post by madmatt on Sept 7, 2021 10:42:08 GMT -5
Are you blowing through the carb??? this does not work on most carbs, and for sure not the ZS... Put the carb before the charger...
Mixture is not displacement dependent... you should be able to jet your carb accordingly, you may not even need different jets! some of them came with adjustable ones. otherwise it's stander jet and needle style adjustment.
|
|