|
Post by calebball25 on Apr 13, 2016 14:46:20 GMT -5
So I have a 89 Subaru Justy GL and i hope i dont get judge for this but i would like to put some new green lug nuts on my car to match the color of my car. but im not sure what the size i need. Are all lugs the same size? are they all the same? i would really like not stripping my studs so if there a certain lug i need that would help a lot! So if anyone knows what lug nut size i need plz help. Thanks!!
|
|
|
Post by Armageddous on Apr 13, 2016 22:20:30 GMT -5
M10 x 1.25, 60 degree taper
Terry
|
|
|
Post by Mato393 on Apr 14, 2016 10:42:11 GMT -5
M10 x 1.25, 60 degree taper Terry It is M12 for sure!
|
|
|
Post by Armageddous on Apr 14, 2016 15:11:01 GMT -5
Woops, I think my autocorrect kicked in there.
Yes they are M12 x 1.25 x 60degree.
Thanks Mato.
Terry
|
|
|
Post by calebball25 on Apr 15, 2016 14:31:18 GMT -5
Right on thanks!!!
|
|
|
Post by thevman on Apr 30, 2016 8:18:07 GMT -5
On the same topic, I am upgrading to some Wolfrace rims for my Justy, and need some longer wheel-studs. Anyone know what measurements the original studs are? I did remove one last year to measure it, but I must have put my measurements somewhere "smart".. I know they are M12 and 1,25 threaded, but I need the measurements for length and the "splined" area that secures it in the hub. The car is a -87 4wd.
|
|
|
Post by thevman on Jun 8, 2016 5:33:30 GMT -5
No one answered my question, so I checked myself: original stud length is just 30mm (including the splines), and the splines-diameter is 14,30mm.
|
|