|
Post by Mato393 on Oct 27, 2016 5:56:32 GMT -5
I have just find this video:
This might be good for bushings that are hard or expensive to get...
|
|
|
Post by justine on Oct 27, 2016 14:38:50 GMT -5
I will be looking into this, thank you! Wont be using cardboard however...
|
|
|
Post by jasin on Oct 28, 2016 5:35:15 GMT -5
I've dane urethane bushings to my justy, but mine were milled from the PU rod of a bigger dimension and a hole was made inside and then a metal bushing was pressed into the inner hole. Works perfect
|
|