|
Post by rrezio on Jun 25, 2016 15:09:46 GMT -5
Greetings from Bulgaria. I have a Subaru Justy 1.0 carb 1991 5-speed MT 4vd and I equipped engine from Subaru 1.2 Justy 1995 4vd with 5-speed MT gearbox. Will I be able to put it and can I use my ECU for the new engine and will it be compatible? Thanks I apologize for my bad English...
|
|
|
Post by chooch on Jun 26, 2016 15:57:21 GMT -5
I would think you should change the ECU, Although similar engines a 1.2 will need more fuel than a 1.0. Unless you want to mess around with piggybacks...
|
|
|
Post by Armageddous on Jun 27, 2016 17:39:08 GMT -5
I would be surprised if the harness was the same too. You may have to change quite a few things.
Terry
|
|
|
Post by jasin on Jul 11, 2016 3:58:39 GMT -5
clutch, flywheel, transmission are different also
|
|
|
Post by Armageddous on Jul 12, 2016 10:00:00 GMT -5
How so? I thought they used the same block except for bore and stroke.
Terry
|
|
|
Post by gearheadeh on Jul 12, 2016 14:20:22 GMT -5
How so? I thought they used the same block except for bore and stroke. Terry The con rods are shorter as is the deck height on the blocks, block is different on the 1 liter
|
|
|
Post by jasin on Jul 13, 2016 0:13:28 GMT -5
there are many different things. ie water pump, the shape of the side cover of the engine (im not sure how its called - the part where there is an oip pump, water pump, etc) also the gasket is different.
|
|