|
Post by aunticat3 on May 17, 2015 12:19:12 GMT -5
I'm looking for a Manifold Absolute Pressure Sensor. It doesn't exist new anywhere anymore. Also, I'd like to sell my Justy, since I'm not a mechanic and I'm having trouble finding parts when things go wrong. I love it, but can't keep up with it anymore. I live in NW Wisconsin, US.
Whoops - 1989 Justy, 2-wd
|
|
|
Post by JustyRally on May 18, 2015 1:19:01 GMT -5
Wrong section for selling but do you have any pictures/info?
|
|
|
Post by aunticat3 on May 18, 2015 8:27:45 GMT -5
Sorry, I'm really bad at navigating this forum. I'm pretty sure it's me.
I'll try to post some pic's soon. It's an automatic, 104000 miles, I'm still driving it almost daily. Rebuilt carborator, new fuel filter, good tires, new muffler, very minimal rust, ding in hood from deer hit ( I was down to about 25-30 mph when I hit it), but did not damage engine / radiator, grill is broke from same, and as mentioned- faulty Manifold Absolute Pressure Sensor.
I bought it from a dealership in 2012, when it had about 53000 miles on it.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 18, 2015 10:40:04 GMT -5
MAP sensors are for fuel injected vehicles. You mentioned a rebuilt carb. Is this for a different Justy? Did a mechanic tell you it needed a MAP Sensor? You more than likely need a new O2 sensor rather than a MAP sensor if we are talking about a carbed vehicle.
|
|
|
Post by aunticat3 on May 19, 2015 10:16:11 GMT -5
it is carbed. My Mechanic called it a Manifold Absolute Pressure Senson - He talked to Subaru Duluth, MN who said the part no. is: 22012KA031. He also said that it's sometimes called a vacuum sensor.(I think)
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 19, 2015 12:21:43 GMT -5
Ok so I looked in my manuals and it appears your Justy does have a vacuum sensor. I have a part number of 22012 KA030 [1988]. Which is one different than the one you have, but would probably work. I tried to find the part on my Justy and found something labeled the Boost Sensor in the general area it should be located. I know that doesn't help much, but if you search for a Justy MAP sensor you will always get results for the EFI models.
|
|
|
Post by aunticat3 on May 20, 2015 9:35:56 GMT -5
Thanks! I'll check with my mechanic to see if it would work.
|
|