|
Post by slomojusty on Aug 21, 2014 20:34:28 GMT -5
My motor needs a rebuild, I think. The thrust bearing is gone, so the motor will need to be pulled and rebuilt. My question is: Can I put an efi head on my carbed bottom end? And if so, what all will I need?
Or would it be more cost effective to source an efi motor and do the entire swap?
|
|
|
Efi swap?
Aug 21, 2014 23:04:40 GMT -5
via mobile
Post by indkid87 on Aug 21, 2014 23:04:40 GMT -5
You could put an efi head on a carb motor, but there's a lot more involved. Really what you want is a donor car. You'll need the head, ecu, harness, fuel pump/lines/filter, intake....
|
|