|
Post by hellsjustys on Jul 22, 2014 15:57:05 GMT -5
I have installed a 1,2 injection engine in my justy j10. but the injection part of the engine is gone so I WONDERED if the 1,2 carburettor would fit this engine?! or is'nt it possible at all? do i have to fabricate everything my self to make it happend? hehe..
|
|
|
Post by Armageddous on Jul 22, 2014 20:47:16 GMT -5
The manifolds do not interchange. You will have to make a very complicated adapter. The water passages are very different as well as the ports.
Terry
|
|
|
Post by hellsjustys on Jul 23, 2014 0:19:41 GMT -5
have to get the injection system then.
|
|
|
Post by blacklight on Jul 23, 2014 1:01:17 GMT -5
What exactly went wrong with the injection system?
Is it possible to install a MegaSquirt system?
|
|
|
Post by hellsjustys on Jul 23, 2014 7:27:34 GMT -5
Thought about to turbo the engine the cheapest way possible so i removed it and delivered it with the donorcar (wreck) this was in 2010, so many years ago.
Engine mangement had been the best ofcours but a little expensive i think? Have to get someone to get it mapped. But might be the best solution.
I have another question. The travers does not seem to fit under the car woth the new engine. This is a car from 1986 and the engine is from 1990->
|
|