|
Post by slomojusty on Jul 9, 2014 23:00:45 GMT -5
The lights in my gage cluster don't work in my '88. My warning lights (CEL, BRAKE, etc.) and indicators all work fine, but my spedo, tach and 4wd indicators don't light up:(
Are these bulbs that I can change? If so where can I get bulbs? Could it possibly be a blown fuse?
Any help would be greatly appreciated. Thanks fellas.
|
|
|
Post by Armageddous on Jul 9, 2014 23:40:15 GMT -5
Check to make sure your dimmer is not turned down, check fuses. If all good then it may be a bad dimmer or burnt bulbs.
You have to remove the instrument cluster to get at the bulbs, I believe they are 194's.
Terry
|
|