|
Post by Mato393 on Feb 9, 2014 12:47:07 GMT -5
I am sure we all want for something like that. Now I got this: Any better ideas? Or I have to edit something on it?
|
|
|
Post by blacklight on Feb 9, 2014 16:15:56 GMT -5
You'd have to make a mirrored version too. If the front of the car on the logo is supposed to point forward on the car itself, then it would go on the left side (drivers side) of the car, and you'd have to make a right version too. Looking good though. //Magnus.
|
|
|
Post by gearheadeh on Feb 9, 2014 17:06:38 GMT -5
You'd have to make a mirrored version too. If the front of the car on the logo is supposed to point forward on the car itself, then it would go on the left side (drivers side) of the car, and you'd have to make a right version too. Looking good though. //Magnus. Yes, What he said, do that and then name your price!
|
|
|
Post by Mato393 on Feb 10, 2014 9:46:48 GMT -5
ok here is it:
|
|
|
Post by nipper on Feb 10, 2014 22:22:22 GMT -5
Something doesnt look right, maybe the hood is too long or the roof is too long?
|
|
|
Post by indkid87 on Feb 10, 2014 22:47:22 GMT -5
I think the proportions are right, it's probably the lack of a b-pillar that makes it look a little long.
Personally I like it, I'd buy one.
|
|
|
Post by Mato393 on Feb 11, 2014 10:20:01 GMT -5
Well now just find where is some company (or something) with some "sticker maker"...
|
|
|
Post by blacklight on Feb 11, 2014 11:32:10 GMT -5
In Sweden there are several company's that, among other things, sell special sticker-paper that you feed into most printers (if it's for ink or laser, I can't tell right now). Could this be an idea?
|
|
|
Post by gearheadeh on Feb 11, 2014 11:38:03 GMT -5
In Sweden there are several company's that, among other things, sell special sticker-paper that you feed into most printers (if it's for ink or laser, I can't tell right now). Could this be an idea? Drat , you got there ahead of me again! I was going to go to a Office supply place today and see if I could do just that! By the way, I think the Outline drawn is superb and should do nicely for what is intended.
|
|
|
Post by blacklight on Feb 11, 2014 11:43:30 GMT -5
gearheadeh: Mato393: It's looking good. Though, I'd like to see a version with the B-pillar too.
|
|
|
Post by Mato393 on Feb 11, 2014 12:34:48 GMT -5
I remember there is some Tint company in my city. Tomorow I ask them if they could make something like this and maybe I make some JUSTY or JUSTY RS signs maybe some J10, J12 or 4WD too.
|
|
|
Post by nipper on Feb 11, 2014 21:51:40 GMT -5
I think the proportions are right, it's probably the lack of a b-pillar that makes it look a little long. Personally I like it, I'd buy one. Yes it is the B pillar throwing me off. All the boards have the stickers so they cant be too hard to source.
|
|
|
Post by Mato393 on Feb 12, 2014 11:47:56 GMT -5
I have only ink printer i do not think ink for home printer can surive long time on sun or rain... Today it was very rainy here so I am not visit any sticker company today. Well maybe tomorow...
|
|
|
Post by Mato393 on Feb 13, 2014 16:40:32 GMT -5
You mean something like this? linkMaybe I try this...
|
|
|
Post by indkid87 on Feb 13, 2014 17:00:50 GMT -5
You mean something like this? linkMaybe I try this... The fact that it is applied using water makes me think it won't hold up too well on the outside of a car. You're better off trying to find a vinyl shop that will custom cut them for you.
|
|
|
Post by Mato393 on Feb 14, 2014 8:58:47 GMT -5
Tonight I found 2 vinyl shops in my city. Maybe they can make inside of JUSTY letters white. In paper shop i found only normal sticky paper... Maybe In some priner shop they have something like that...
|
|
|
Post by Mato393 on Feb 24, 2014 11:40:23 GMT -5
So I must make it bigger (300dpi) but I do not have bigger old logo... It is too hard to make it bigger for me... This is the best I have now: What if I make it withouth logo?
|
|
|
Post by Mato393 on Mar 2, 2014 11:14:01 GMT -5
So... final version?
|
|
al
Posts: 90
|
Post by al on Mar 6, 2014 18:04:48 GMT -5
That'd be tight id sport one the only sticker I have is ok subaru came when I bought this beast
|
|
|
Post by Mato393 on Mar 10, 2014 13:07:16 GMT -5
Good news everybody! Stickers are home! They are printed on white background. Slize is 175x75mm + something around 5-10mm of frame. You can cut them off yourself... ...I need to buy some envelopes You get 2 stickers for left side and right side You can select by: Before facelift 3 door After facelift 3 door Before facelift 5 door After facelift 5 door (only 1st gen. Justys ) I do not need to make some big money on that... If someone want to pay for that just wrote me how much and your address and I send it cash on delivery. If you do not want no problem... (I am not sure how long could be that plausible ) All of that money goes to making more and better stickers. Chcek THIS too for more extra kw
|
|