|
Post by kcjusty on Mar 9, 2013 18:30:31 GMT -5
Hey I'm pretty knew to owning a justy and a noob to the automotive world in general. I was changing the oil in my 94 Justy DL and I decided to check the spark plug connections for corrosion. I plugged them back in and now my car won't start. I'm doing everything I normally do when I start it but it won't even turn over. Does anyone have any ideas what could be causing this? I would really appreciate some help!
|
|
|
Post by bcbishop on Mar 9, 2013 23:46:26 GMT -5
pull a spark plug back out and keep the plug wire plugged in and touch the spark plug on the motor and get someone to crank the motor and see if you are getting spark
|
|
|
Post by nipper on Mar 10, 2013 0:56:03 GMT -5
Start by checking the battery if the car wont crank at all. Make sure it is charged, the terminals are clean and tight.
|
|
|
Post by kcjusty on Mar 10, 2013 12:49:22 GMT -5
Well thanks for the input. I found the problem and it turned out not to have anything to do with the spark plugs. When I was changing my oil I must have accidentally disconnected the little wire that goes to the starter solenoid. It wasn't on there very tight and I guess when I was reaching behind the engine to put in the new oil filter I must have hit it and knocked it loose. Anyway, problem solved thanks again everybody!
|
|