|
Post by whitedonkey8 on Apr 16, 2012 15:06:59 GMT -5
Hi ya,
Ok I have an O2 sensor just hanging out, I have looked high and low and can not find out where it was connected to?
Can someone please send me a picture or write a detailed description of where this connector is on a 93, 1.2 L, 2WD.
thanx,
E
|
|
dogoman
A Boxer engine will fit in a Justy, its called a WRX
Posts: 445
|
Post by dogoman on Apr 16, 2012 19:31:37 GMT -5
hold the end of the wire and move it round, the plug has to reach it....can't be far from the sensor and remember, gravity makes things head towards the ground....it should be pretty clse and depending on model could be only 1 single wire with a bullet style connector.
|
|
|
Post by justygirl2 on Jun 27, 2018 13:21:07 GMT -5
Could somebody tell me where the o2 sensor plugs in at on a 91 justy 4wd
|
|
|
Post by Justy4x4 on Jun 27, 2018 14:50:26 GMT -5
The connector should be right near the passenger side headlight (assuming your car is left hand drive). It's a single wire with a white connector.
|
|