|
Post by bruceworsley on Aug 17, 2010 12:40:55 GMT -5
Please can you tell me what fault codes 24 and34 refer to, I have tried looking in www.dustsjustys.com but can't find them. I live in the UK where Subaru dealers are no help one saying that he wasn't aware that there were auto Justys. My 94 year old Motheres Justy is a 1991 ECVT 4WD, has only done 26600miles and has developed a fault that I am trying to sort. I appreciate any help you can give me, thanks
|
|
Danimal
Getting my two Justys back together after a Justy hiatus.
Posts: 589
|
Post by Danimal on Aug 17, 2010 15:30:25 GMT -5
Is it your idle speed control solenoid valve and your EGR solenoid valve?
Danimal
|
|
|
Post by bruceworsley on Aug 18, 2010 11:19:19 GMT -5
That sounds like engine fault codes rather than ECVT, the engine is running perfectly, it's the transmission that is faulty and I got the codes from the clutch temperature warning light as described in this Forum.
|
|
Danimal
Getting my two Justys back together after a Justy hiatus.
Posts: 589
|
Post by Danimal on Aug 30, 2010 19:17:56 GMT -5
Well, are any of the ECVT owners able to help out? Did you manage to get it sorted yet, Bruce? Danimal
|
|
|
Post by bruceworsley on Dec 7, 2010 16:27:40 GMT -5
Hi Danimal, sorry for delay in replying to you...I replaced the brushes (1 was broken) and it fixed my problem, ECVT has been performing perfectly since then. Thanks for your interest
|
|