|
Post by justytr on Jan 30, 2010 15:57:49 GMT -5
Alright, I performed an ECVT error test, the following codes appeared. Could someone help me ID them?
3 13 14 15 25 31 32 33 34 35 41 45
Thank you
PS:this may be alot, but I don't know if it is all my problems, may be some antherior problems who got solved, and memory have not been cleared, however, I won't take any chances.
|
|
|
Post by Quidam on Jan 31, 2010 8:01:52 GMT -5
Hey,
Look here for info:http://www.dustysjustys.com/home.htm
That's a lot of codes but if you clear them, they'll come back if needed.
Doug
|
|
|
Post by Quidam on Jan 31, 2010 22:05:42 GMT -5
Hey, Look here for info:http://www.dustysjustys.com/home.htm That's a lot of codes but if you clear them, they'll come back if needed. Doug Edit: That's like every code in the book but like three...or something. The only time I've dealt with codes is when I got it wet, the wiring. Oh, and the man suggested cleaning the brushes. If you look, that's in the factory recomendations too. Good luck, Doug
|
|
|
Post by justytr on Feb 2, 2010 21:20:54 GMT -5
Wow, honestly, I don't know how to clear the memory, but thanks
The brushes, are behind the Starter right? I never worked really on this kind of car , I've been having mine for a bit, but i'm not very experienced in mechanics.
|
|
|
Post by Quidam on Feb 3, 2010 12:34:02 GMT -5
Yes, brushes under the starter.
Under steering wheel/dash, ECVT control unit. Plugged in Memory back up connector.
"Check Mode Connectors" should be un-plugged.
It's been a while since I've done it...anyone?
Doug
|
|