|
Post by Izimo on Mar 2, 2008 13:56:38 GMT -5
Yes i have one. If you look carefully throw the back window you can see it inside. I'd love to go to Holland (To go to the Redlight street! Lol).I will go there for sure during my life. It's called 'De Wallen' in Amsterdam haha, you can come through Maastricht and smoke a J
|
|
|
Post by hollandjusty on Mar 2, 2008 18:22:14 GMT -5
It's called 'De Wallen' in Amsterdam haha, you can come through Maastricht and smoke a J jep 'red light district' lol eh? holland
|
|
|
Post by Armageddous on Mar 3, 2008 15:20:50 GMT -5
Impressive paint. I think my 1st gen aspires to be black. I have not read this whole post; what did you use to paint it with? Just rattle-cans, or a compressor setup? Car looks great. Good to see I don't own the only 1stgen out there. =D -Terry
|
|
durbas
Justy 1.0 4WD SL - 1985
Posts: 70
|
Post by durbas on Mar 4, 2008 4:32:00 GMT -5
I used a compressor setup to do the paint job. The paint wasn't made for painting cars, but as i sell paint to houses and other stuff it was an economical paint job! I don't think it will last many time, but it looks good for now and much better than it was before. ;D See you. Post some pics soon with the front bumper.
|
|
durbas
Justy 1.0 4WD SL - 1985
Posts: 70
|
Post by durbas on Mar 8, 2008 4:15:46 GMT -5
Front Bumper is in place! ;D What about this spoiler? What do you think? Did also a cleaning job! It was really, really dirty inside! Will now start the turbo install! ;D Have a IHI RHB32 turbo that should be the very best for a 1.0L engine like this! See you!
|
|
89
got Mud? Ice? Snow?
Posts: 398
|
Post by 89 on Mar 8, 2008 11:14:46 GMT -5
D, Just my humble opinion on wings/rear spoilers- for hot hatches (and hot hatches to be) I vote for swept designs coming off the hatch itself. They look 'the business'. Options run the gambit... 'from mild to wild'. Have Fun; thanks for sharing,
|
|
SeattleJusty
No, a boxer will not fit in a Justy.
Posts: 1,587
|
Post by SeattleJusty on Mar 8, 2008 12:37:08 GMT -5
You asked, so I'ma tell ya; that wing you set up on top of your car is not only the worst looking abomination to automotive taste that I have seen in several years, but it is functionally worthless. I have seen that wing up close on other cars and I know its shape. It isn't manipulating the air passing over and under it in such a way as to make any downforce at all. If anything, it will make your car slower (drag) and noisier (not the good kind).
|
|
durbas
Justy 1.0 4WD SL - 1985
Posts: 70
|
Post by durbas on Mar 28, 2008 7:12:26 GMT -5
This is my turbo! So my question is: What do those tubes that are in opposide directions? Please tell me something! It's an IHI RHB32.
|
|
durbas
Justy 1.0 4WD SL - 1985
Posts: 70
|
Post by durbas on Mar 28, 2008 7:12:41 GMT -5
|
|
|
Post by gearheadeh on Mar 28, 2008 10:40:36 GMT -5
Every bearing needs oil.....Oil returns perhaps!.
|
|
Dunk
EF12 Turbo 12psi
Posts: 576
|
Post by Dunk on Mar 28, 2008 14:45:50 GMT -5
How many Pipes/holes has it got? Should have water in/water out, oil in/oil drain
|
|
durbas
Justy 1.0 4WD SL - 1985
Posts: 70
|
Post by durbas on Mar 29, 2008 3:18:17 GMT -5
It can be the water cooling... So my next question is were do i get the water to feed the turbo? Thanks.
|
|
Dunk
EF12 Turbo 12psi
Posts: 576
|
Post by Dunk on Mar 29, 2008 10:34:02 GMT -5
Split the heater hoses
|
|
durbas
Justy 1.0 4WD SL - 1985
Posts: 70
|
Post by durbas on Mar 31, 2008 2:33:53 GMT -5
dunk: Can you explain me more in detail were to split the hoses and it would very nice to show me with pictures. ;D Thanks.
|
|
Dunk
EF12 Turbo 12psi
Posts: 576
|
Post by Dunk on Mar 31, 2008 16:32:56 GMT -5
dunk: Can you explain me more in detail were to split the hoses and it would very nice to show me with pictures. ;D Thanks. Don't have any pics sadly There should be two water pipes going to you heater core behind your firewall from the engine bay, cut both of these and fit two "T piece" fittings, connect pipes to turbo, and job done
|
|
durbas
Justy 1.0 4WD SL - 1985
Posts: 70
|
Post by durbas on Apr 3, 2008 11:29:52 GMT -5
Today i'm f***ing FURIOUS The shop took me 50€ for pipes to feed the turbo with water and oil! Men this thing of putting a turbo is getting way costly! F**k F**k F**k F**k F**k F**k
|
|
durbas
Justy 1.0 4WD SL - 1985
Posts: 70
|
Post by durbas on Apr 3, 2008 11:33:52 GMT -5
I paied 75€ for may car!.... And some pipes cost me 50€?!!! Oh men!... Sorry people, but i have to tell someone... I can't tell to my friends, they will probably laught!...
|
|
|
Post by Izimo on Apr 3, 2008 15:38:02 GMT -5
Well that's the risk my man! Than you shouldn't buy new pipes
|
|
durbas
Justy 1.0 4WD SL - 1985
Posts: 70
|
Post by durbas on Apr 4, 2008 3:25:19 GMT -5
Question: What are the possible causes for the fan of the radiator not working? Thanks.
|
|
durbas
Justy 1.0 4WD SL - 1985
Posts: 70
|
Post by durbas on Apr 4, 2008 3:27:54 GMT -5
Other Question: Best way to protect pipes (tubes) from the heat?
|
|