|
Post by JLantz on Dec 9, 2004 19:01:06 GMT -5
In the engine compartment, on the top middle of the firewall, my Justy has a few large connectors just hangin' out. I always thought they were diagnostic connections, but I saw a pic of someone else's engine compartment recently and there were relays connected to them. In the Chilton manual wiring diagram it shows the connectors and calls them "check connector". None of the diagrams show the relays.
Does your Justy have the relays? Do you know what they are for?
My Justy is a FI 4wd 5sp 1991.
|
|
|
Post by JLantz on Dec 12, 2004 20:17:10 GMT -5
Is anyone out there?
|
|
|
Post by justyfanatic2 on Dec 12, 2004 22:04:49 GMT -5
Hi If you mean the three relays in the middle of the firewall, mine were used for the A/C and heater system.
|
|
|
Post by SUBIEJIM on Dec 13, 2004 9:46:08 GMT -5
Sorry, This was the first I've seen of this post. Justyfanatic2 is right on the money! The relays are used on 2nd gen Justys (89-95) for the dealer installed A/C system. Both of my 89 A/C equipped Justys have them and 3 of my non A/C 2nd gen cars do not. Hope this helps, Jim
|
|